Filter
Top Products
112
6. Wave ...............................................................
Displays the waveform of the track audio. Here you can
set the editing locations (IN, OUT, TO, END) more pre-
cisely. (→p.108)
7. Mode ...............................................................
Selects the way in which expansion/compression will
be processed.
Press the “Mode” button to open the following dialog
box.
Press the [YES/OK] key to apply the selected processing
method.
Your selections will be discarded if you press the [NO/
CANCEL] key.
7a. SelectExp/CompMode..........[Fast, Mid, Best]
Selects the conversion mode for expansion/compres-
sion.
Fast: Processing will be performed as quickly as possi-
ble.
Mid: Mid-way between “Fast” and “Best”
Best: Audio quality will be maintained as high as possi-
ble.
However, this setting has no effect if “SelectPitch” is set
to “Variable.”
7b. SelectPitch ..........................[Fixed, Variable]
Selects whether the playback pitch will be affected by
the expansion/compression command.
Fixed: The pitch will not change
Variable: The pitch will change
EditType: “CopyWholeTrack”
Copies the entire copy-source track (the currently selected
virtual track) from beginning to end, to the specified virtual
track of the copy-destination track.
This operation overwrites the data of the destination
track.
2. SourceTrack ......................................................
[1...12, 1–2...11–12, 1–4...9–12, 1–6, 7–12, 1–12]
Selects the copy-source track.
For a 24-bit song, you will be able to select tracks 1–6.
3. DestTrack..........................................................
[1...12, 1–2...11–12, 1–4...9–12, 1–6, 7–12, 1–12]
Selects the copy-destination track.
For a 24-bit song, you will be able to select tracks 1–6.
4. DestVTrack............................................... [a...h]
Selects the virtual track of the copy-destination track
(“DestT
rack”).
5. Exec.(Execute)...................................................
Executes the track editing operation.
EditType: “SwapWholeTrack”
Swaps (exchanges) the entire swap-source track (the current-
ly selected virtual track) with the specified virtual track of
the swap-destination track.
Use this when you want to rearrange the order of the record-
ed tracks. For example when you have finished a song, you
could use this operation to place the final data for all tracks
in virtual track “a.”
When you execute this operation, the track data of the
“Sour
ceTrack” and “DestTrack” will be exchanged.
2. SourceTrack ......................................................
[1...12, 1–2...11–12, 1–4...9–12, 1–6, 7–12, 1–12]
Selects the swap-source track.
For a 24-bit song, you will be able to select tracks 1–6.
3. DestTrack..........................................................
[1...12, 1–2...11–12, 1–4...9–12, 1–6, 7–12, 1–12]
Selects the swap-destination track.
For a 24-bit song, you will be able to select tracks 1–6.
4. DestVTrack............................................... [a...h]
Selects the virtual track of the swap-destination track
(“DestT
rack”) whose data will be exchanged.
5. Exec.(Execute)...................................................
Executes the track editing operation.
7b7a
SourceTrack
DestVTrack (a...h)
1
5
2
3 4
SourceTrack
DestVTrack (a...h)
SourceTrack
DestVTrack (a...h)
1
5
2
3 4