Filter
Top Products
18
3. Creating a new song
In order to begin recording, you must first create a new blank song.
1 Press the [SONG] key to access the “SelSong” tab page.
2 Use the [CURSOR] keys to select the “New” button, and press the
[ENTER] key. The “MakeNewSong” dialog box will appear.
3 Specify the bit depth/number of tracks and the mixer settings for the
song that will be created.
Use the “SongType” buttons to select the bit depth and number of
tracks, and press the [ENTER] key. Select the “MixerSet” setting in
the same way.
For this example, select “16Bit/12Track” and “New.”
4 Press the [YES/OK] key.
A new empty song named “NEWSONG” will be created
4. Using the modeling mode
1 Press the [MODELING] key, select “Guitar” from the three catego-
ries, and press the [ENTER] key.
The LEDs of the [MODELING] key and the CH 1 and 2 [TRACK
STATUS] keys will light red.
2 Check the input level.
Press the [METER/TRACK VIEW] key.
“SongType,” “MixerSet”
(→p.116)
Editing the song name
(→p.31)
Modeling mode (→p.45)