Filter
Top Products
138
These algorithms can be selected for an insert effect when
“1in1outx4” is selected as “Select Eff Type.”
Different effects can be used simultaneously on four channels/
tracks.
Effects MM1–MM33 connect two mono effects in series.
Example
Algorithm number: Category number: Algorithm name
[Names of effects in the chain]
55: MM1: P4EQ – Exciter
[P4EQ Excit1]
The chain structure of each multi-effect is shown below.
For an explanation of the parameters of each effect in the chain,
refer to “Effects within multi-effect programs MM1–MM33, and
their parameters” beginning on the following page.
55: MM1: P4EQ – Exciter
[P4EQ, Excit1]
56: MM2: P4EQ – Wah
[P4EQ, Wah]
57: MM3: P4EQ – Cho/Flng
[P4EQ, ChFl1]
58: MM4: P4EQ – Phaser
[P4EQ, Phaser]
59: MM5: P4EQ – Mt.Delay
[P4EQ, Mt.Dly]
60: MM6: Comp – Wah
[Comp2, Wah]
61: MM7: Comp – AmpSim
[Comp2, AmpSim]
62: MM8: Comp – OD/HiG
[Comp1, ODHiG]
63: MM9: Comp – P4EQ
[Comp1, P4EQ]
64: MM10: Comp – Cho/Flng
[Comp2, ChFl1]
65: MM11: Comp – Phaser
[Comp2, Phaser]
66: MM12: Comp – Mt.Delay
[Comp2, Mt.Dly]
67: MM13: Exciter – Comp
[Excit2, Comp1]
68: MM14: Exciter – Limiter
[Excit2, Lmtr]
69: MM15: Exciter – Cho/Flng
[Excit2, ChFl1]
70: MM16: Exciter – Phaser
[Excit2, Phaser]
71: MM17: Exciter – Mt.Delay
[Excit2, Mt.Dly]
72: MM18: Limiter – P4EQ
[Lmtr, P4EQ]
73: MM19: Limiter – Cho/Flng
[Lmtr, ChFl2]
74: MM20: Limiter – Phaser
[Lmtr, Phaser]
75: MM21: Limiter – Mt.Delay
[Lmtr, Mt.Dly]
76: MM22: OD/HiG – Cho/Flng
[ODHiG, ChFl1]
77: MM23: OD/HiG – Phaser
[ODHiG, Phaser]
78: MM24: OD/HiG – Mt.Delay
[ODHiG, Mt.Dly]
79: MM25: OD/HiG – AmpSim
[ODHiG, AmpSim]
80: MM26: Wah – AmpSim
[Wah, AmpSim]
81: MM27: Decimator – AmpSim
[Decim, AmpSim]
82: MM28: Decimator – Comp
[Decim, Comp1]
83: MM29: Cho/Flng – Mt.Delay
[ChFl2, Mt.Dly]
84: MM30: Phaser – Cho/Flng
[Phaser, ChFl2]
85: MM31: AmpSim – Tremolo
[AmpSim, Trml]
86: MM32: Reverb – Gate
[Reverb, Gate]
87: MM33: MicSim – Limiter
[MicSim, Lmtr]
Insert (1in1outx4)