Filter
Top Products
12
Objects in the display
To select an object shown in the display, use the [CURSOR]
keys to select it, and press the [ENTER] key.
In this manual, references enclosed in double quotation
marks such as “...”, “...” button, or “...” tab refer to ob-
jects in the display. On the other hand, references en-
closed in square brackets such as [...] key, [...] knob, [...]
dial, or [...] fader refer to controls or items on the front
panel or rear panel of the D1200.
a: Current parameter
This is the name of the parameter that is currently
selected by the cursor.
In the case of icon-type parameters such as EQ or faders,
the value is shown at the right.
b: Edit cell
This is a parameter that is underlined in the display.
When you use the cursor to select an edit cell, the
parameter value display will be highlighted, and can be
edited.
To edit the parameter value in the edit cell, use the
[VALUE] dial (→p.8) or popup buttons in the display.
c: Popup button
When you select one of these buttons and press the
[ENTER] key, a dialog box (f) will appear.
To input a parameter value, select the desired value in
the dialog box.
, ,
d: Toggle button
This type of button will switch a function on/off each
time you select it and press the [ENTER] key. The frame
will become thicker when selected.
(on)/ (off)
e: Tab page
Each mode contains numerous parameters, which are
organized into pages. These pages are divided by tabs.
f: Dialog box
Press the [YES/OK] key to execute, or the [NO/CAN-
CEL] key to close the dialog box without executing.
You can also make your choice by selecting the “OK” or
“Cancel” button, and pressing the [ENTER] key.
g: Radio buttons
This type of button is used to select one of multiple
choices. Select one of the radio buttons and press the
[ENTER] key.
h: Icons
These are objects shaped like sliders or knobs. To edit
the value, select the icon and turn the [VALUE] dial.
i: Scroll buttons
Use these to see parameters that are not currently shown
in the display.
Objects in the display and
their function
e: Tab page
a:Current
parameter
c: Popup
button
d:Toggle
button
b: Edit cell
g: Radio buttons f: Dialog box
h: Icons
i: Scroll buttons