Filter
Top Products
96
the current time location as specified by the tempo maps
you created in the “TmpMap” tab page.
4. SelRhythm ........................[(Rhythm Pattern List)]
Specifies the rhythm pattern if “TempoSource” is set to
“Manual.”
If “TempoSource” is set to “TempoMap” or “Tem-
poTrack,” this area will indicate the rhythm pattern for
the current time location as specified by the tempo maps
you created in the “TmpMap” tab page.
Press the “ ” button and select a rhythm pattern from
the dialog box. The available rhythm patterns will
depend on the “Beat
” setting.
5. RhythmVol ....................................... [000...100]
Adjusts the rhythm volume that is sent to the master LR
bus or the monitor LR bus.
In the [INPUT/OUTPUT/SOLO] “Monitor” tab page
you can select the bus to which the rhythm is sent.
6. Rhythm................................................[On, Off]
Switches the rhythm on/off.
On: The rhythm will be sent to the moni-
tor LR bus or the master LR bus. Use the [INPUT/OUT-
PUT/SOLO] “Monitor” tab page “Rhythm” button to
specify the bus to which the rhythm will be sent
(→p.100). The [RHYTHM] key LED will light.
Off: The rhythm will not be sent to the
monitor LR bus or the master LR bus.
During bounce-recording, the rhythm will be recorded
if this is “On.”
If you make settings in the [INPUT/OUTPUT/SOLO]
“Ch1–6” or “Ch7–12” tab page to assign rhythm
(“Rhythm L,” “Rhythm R”) to a mixer channel, the
rhythm will sound during recording or playback, re-
gardless of this setting.
If “Rhythm” is “On,” the currently-selected rhythm will
sound while this tab page is displayed, even if the re-
corder is stopped. The rhythm will continue sounding
even if you move to the “METER/TRACK VIEW” tab
page.
7. Pattern Length, Pattern Position .........................
Indicates the number of measures (length) in the pattern
selected by “SelRhythm,” and the current measure
within the pattern.
Example: (L4:1): Playing measure 1 of a four-measure
pattern.
TmpMap: Tempo map editing
By creating tempo maps you can change the tempo, time sig-
nature, and rhythm pattern during the song while it plays or
records.
For details on how to create tempo maps, refer to p.49.
Tempo, time signature, and rhythm changes can be
placed only at the beginning of a measure.
1. TempoMap....................................... [001...200]
Indicates the tempo map number that is selected.
To the right of this number, the display shows the start-
ing measure, ending measure, tempo, time signature,
and rhythm pattern.
You can press the “ ” button and make your selection
in the dialog box that appears.
“TempoMap” cannot be selected if “TempoSource” is
“Manual.”
2. New.................................................................
Creates a new tempo map and adds the tempo map.
The following “Select Tempo Map *** Param” dialog
box will appear.
2a. StartMeas ..................................[001...999]
Specifies the starting measure for the tempo map that
will be created.
2b. EndMeas.................................... [001...999]
Specifies the ending measure for the tempo map that
will be created.
2c. Tempo.......................................... [40...240]
Specifies the tempo in a range of =40–240.
2d. Beat................................... [01/04...16/16]
Specifies the time signature.
2e. Rhythm .......................[(Rhythm Pattern List)]
Specifies the rhythm pattern. If you want the rhythm to
be silent during part of the song, select a silent rhythm.
Press the “ ” button and make your selection in the dia-
log box that appears.
1
5
2
4
3
2a
2c
2e
2d 2f2b