Filter
Top Products
131
VA-76 – Automatic functions for User Programs
Linking a MIDI Set to a User Program
MIDI Sets are “User programs for MIDI parameters”.
There are eight such memories (see page 207). If you
regularly use the VA-76 in different MIDI environ-
ments (studio, live, band), preparing three MIDI Sets
and linking them to the User Programs you usually
use in the studio, on stage, etc., can be a time saver. In
other situations, such a link could be dangerous,
because it would reconfigure the VA-76’s MIDI
parameters without you actually knowing it.
6.
Press a MIDI Set [1]~[8] field to select the desired
MIDI Set.
7.
Press the MIDI Set [Link OFF] field to make it read
[Link ON] if the selected MIDI Set should be recalled
every time you select this User Program.
Note: Do not forget to write your User Program after chang-
ing these settings (see page 127).
8.
Press the [oBack] field and the [EXIT] field to
return to the Master page.
User Program selection at power-on
Whenever you switch on the VA-76, it automatically
selects User Program 00 Free Panel (see page 128). But
maybe you prefer to be “operational” right away
(without using the Virtual Band function). In that
case, tell the VA-76 which User Program it should
recall whenever you switch it on:
1.
Press the [FUNCTION MENU] button.
2.
Press the [Global Parameter] field on the Function
Menu.
3.
Press the [Startup] field in the bottom row of the
display.
4.
Press the [Startup User Program] field so that it is
displayed in white.
5.
Use [i][m] or the [TEMPO/DATA] dial, to select
the User Program to be recalled.
If you don’t want a User Program to be recalled, select
“Off”.
6.
Press [EXIT] to return to the Master page.
VA-76.book Page 131 Friday, January 12, 2001 12:35 PM