Filter
Top Products
VA-76 Owner’s Manual—VA-76 clinics
58
6.
Press the [k] field several times until the following
page is displayed:
7.
Set the [Volume] slider to “0”, and press the [ON/
OFF] field below this slider to select “OFF” (if neces-
sary).
Let us now set the input sensitivity of the VariPhrase
[INPUT] socket.
8.
Sing into the microphone and gradually increase
the VariPhrase [LEVEL] setting (rear panel).
Set it so that the INPUT OVER indicator in the Vari-
Phrase section does not light even when you sing at
the top of your voice.
Note: At this point, you won’t hear your voice because the
Audio In part is off.
9.
Locate the microphone in such a way that it cannot
pick up the signal from the external speakers.
Failure to do so will result in a nasty howling tone also
known as feedback. This should be avoided at all costs.
10.
Press the [OFF] field below the [Volume] slider to
make it read [ON].
11.
Set the VA-76’s [VOLUME] knob to a comfortable
listening level (about halfway for the time being).
12.
Gradually increase the setting of the on-screen
[Volume] slider while singing or talking into the
microphone.
You should now be able to hear your voice.
13.
You can also add Reverb and Chorus to your voice:
• Press the [ON/OFF] field between the [Chorus] and
[Reverb] sliders to make it read “ON”. This field can
also be used for muting the effects when you need to
make an announcement and don’t want it to sound
like you are in a church, etc.
Note: This function can also be controlled via the assignable
footswitch (see page 192).
• Use the [Chorus] and [Reverb] sliders for setting the
desired Chorus/Reverb depth. See page 124 for details
about these effects.
14.
To quickly switch on/off the Audio In part, press
the [ON] (or [OFF]) field below the on-screen
[Volume] slider.
Note: While the above on-screen settings can be written into
a User Program, the settings of the [GAIN] switch and
[LEVEL] knob on the rear panel cannot. You may want to
write them down for future reference.
15.
Now try singing and playing together. If your
voice is too soft, increase the setting of the [Volume]
slider in the display.
16.
Press [EXIT] to return to the Master page.
Single Part
By pressing the [Single Part] field on the above display
page, you select a page where the above parameters are
displayed in the following manner. Choose whichever
is more convenient for you.
This indicator should not light.
VA-76.book Page 58 Friday, January 12, 2001 12:35 PM