Filter
Top Products
118 Chapter 9—Input & Output Patching
DM1000 Version 2—Owner’s Manual
Viewing and Changing Insert In Patch
You can view and also change the items patched to the Insert Ins of all Input Channels (or
all Output Channels). This is useful when you wish to find out if multiple channels have the
same patch.
1To view the Input Channels’ Insert Ins, press the [INPUT PATCH] button
repeatedly until the In Patch | Insert In page appears.
This page displays Input Channels 1–48 Insert In Patches.
2 Move the cursor to a channel patch parameter box you wish to change, then
rotate the Parameter wheel or press the [INC]/[DEC] buttons to modify the
patching.
3 Press [ENTER] to confirm the change.
4To view the Output Channels’ Insert Ins, press the [OUTPUT PATCH] button
repeatedly until the Out Patch | Insert In page appears.
5 Move the cursor to a channel patch parameter box you wish to change, then
rotate the Parameter wheel or press the [INC]/[DEC] buttons to modify the
patching.
6 Press [ENTER] to confirm the change.