Filter
Top Products
74 Chapter 6—Input Channels
DM1000 Version 2—Owner’s Manual
C BUS ROUTING/FOLLOW PAN section
• BUS ROUTING............ This section enables you to select a destination Bus for the
selected channel. When the D button is turned on, the channel
signal is patched to the Direct Out selected in the parameter
box below the button.
• FOLLOW PAN .............This button determines whether the Input Channel’s Pan set-
ting is applied to the paired Bus Outs (Follow Pan function).
When the button is turned off, the Follow Pan function is dis-
abled and an identical signal is sent to the paired Bus Outs. In
surround mode, it also determines whether the Surround Pan
setting is applied to the Bus Outs.
D AUX section
• AUX ...............................These controls set the currently-selected Input Channel’s Aux
Send 1–8 levels and positions. (See page 93 for more informa-
tion on Aux Sends.)
E Meter section
• Meters............................These meters indicate the levels of the currently-selected Input
Channel.
• PRE EQ/PRE FADER/POST FADER........... The metering position is displayed below
the meters.
F GROUP section
• FADER/MUTE/EQ/COMP ................These buttons indicate which Fader, Mute, EQ,
or Comp group, if any, the currently-selected
Input Channel is in. If the channel is in a group,
the group number appears. If the channel is not
in a group, “—” appears.