Filter
Top Products
154 Chapter 12—Grouping Channels & Linking Parameters
DM1000 Version 2—Owner’s Manual
2 Press the up ( ) or down ( ) cursor button to select a link to which you want
to add channels.
3 Press the [SEL] button for a channel you wish to add to the EQ or Compressor
link.
The selected channel is marked with “ ” and the channel is added to the link.
4 In the same way, press the [SEL] button for other channels you wish to add
to the link.
The EQ or compressor settings for the first channel added to the link are applied to all sub-
sequently-added channels.
5 After all desired channels are added to the link, edit the EQ or compressor
parameters for one of the linked channels.
The edits for the EQ or compressor parameters are applied to the rest of the linked channels.
Tip:
•If you add one channel from a pair to a link, the pair partner is automatically added to the
link.
•You can also select a channel on another layer by switching layers.
Example: EQ link C for Input Channels is selected.
Example: Input Channels 1–4, 6, 9–10 and 14 have been
added to EQ link C.