Filter
Top Products
194 Chapter 16—Automix
DM1000 Version 2—Owner’s Manual
3 Press the DISPLAY ACCESS [REMOTE] button repeatedly until the Remote |
Machine page appears.
4 Assign the Insert In and Out Locate points to the Locate memories specified
in the LOCATE/TIME section (page 244) and selected in Step 2.
5 Press the DISPLAY ACCESS [AUTOMIX] button repeatedly until the Automix
| Main page appears.
6 Use the cursor buttons to select the INSERT button, then press [ENTER].
A confirmation message appears.
The default IN and OUT parameter values use the Locate memories specified in Steps 1 –
4. If you change the Locate points for the corresponding Locate memories while the confir-
mation message is displayed, the IN and OUT parameter values will be updated accord-
ingly.
If MIDI clock is selected as a timecode source, the values are displayed by bars.