Filter
Top Products
I/O Slot Spec (1–2) 339
DM1000 Version 2—Owner’s Manual
Appendix
I/O Slot Spec (1–2)
Each I/O SLOT accepts a digital interface card. SLOT #1 has a serial interface.
Control I/O Spec
Maker Model Function INPUT
OUTPUT
1
1. Selectable from STEREO/BUS/AUX/DIRECT/EXT INSERT/SURROUND MONITOR/CR MONITOR.
Details depend on each interface card.
Format Resolution Frequency
The
number of
Available
cards
Note
Yamaha
MY8-AT
Digital I/O
88
ADAT
24 bit
44.1/48 kHz
2
Can handle
24 bit/96 kHz by
double channel mode
MY16-AT 16 16
MY8-TD 8 8
TASCAM
MY16-TD 16 16
MY8-AE 8 8
AES/EBU
MY16-AE 16 16
MY8-AEB
88MY8-AE96S
44.1/48/88.2/96 kHz
Sampling Rate Con-
verter for input
MY8-AE96
MY4-AD
ANALOG IN
4
—
—
24 bit
44.1/48 kHz
2
MY8-AD
8
20 bit
MY8-AD24
24 bit
MY8-AD96 44.1/48/88.2/96 kHz
MY4-DA
ANALOG OUT —
4 20 bit 44.1/48 kHz
MY8-DA96 8
24 bit 44.1/48/88.2/96 kHz
MY8-
ADDA96
ANALOG I/O 8 8
MY8-mLAN
mLAN Interface
88
IEEE1394 24 bit 44.1/48 kHz Maximum 5 nodes
MY16-
mLAN
16 16
Waves
Y56K
Effect & I/O 8 8 ADAT 24 bit
44.1/48 kHz 1
Y96K 44.1/48/88.2/96 kHz 2
Apogee
AP8AD ANALOG IN 8 —
— 24 bit 44.1/48/88.2/96 kHz 2 4ch @fs=88.2, 96 kHz
AP8DA ANALOG OUT — 8
I/O Port Format Level Connector in Console
TO HOST USB USB 0 V–3.3 V B type USB connector
MIDI
IN
1
1. MIDI IN can use as TIME CODE IN MTC.
MIDI — DIN Connector 5P
OUT
MIDI — DIN Connector 5P
TIME CODE INPUT SMPTE Nominal –10 dB/10k Ω
XLR-3-31 type (Balanced)
2
2. XLR-3-31 type connectors are balanced (1=GND, 2=HOT, 3=COLD).
WORD CLOCK
IN
— TTL/75 Ω BNC Connector
OUT
— TTL/75 Ω BNC Connector
CONTROL
—
C-MOS IN, Open collector OUT
1pin: 150 mA, 8pin total: 500 mA
D-SUB Connector 25P (Female)
REMOTE
— RS422 D-SUB Connector 9P (Male)
METER
— RS422 D-SUB Connector 15P (Female)