Filter
Top Products
218 Chapter 17—Remote Control
DM1000 Version 2—Owner’s Manual
Configuring the DM1000
Follow the steps below to set up the DM1000 so that you can remotely control Pro Tools
from the DM1000 Remote Layer 1.
1 Press the DISPLAY ACCESS [SETUP] button repeatedly until the Setup |
MIDI/Host page appears.
2 Move the cursor to the first DAW parameter box (
1) in the SPECIAL FUNC-
TIONS section, then rotate the Parameter wheel to select USB as the port.
3 Press [ENTER] to confirm the setting.
4 Move the cursor to the adjacent parameter
box (on the right), then rotate the Param-
eter wheel to specify the port ID.
5 Press the DISPLAY ACCESS [REMOTE] button, then press the [F1] button.
The Remote | Remote 1 page appears.
Note: If you select an incorrect port, you will be unable to use the Remote function. Be sure
to match the port ID with that specified in the Peripherals window in Pro Tools.
1
2