Filter
Top Products
264 Chapter 19—Controlling the DM1000 from a Video Editor
DM1000 Version 2—Owner’s Manual
Video Editors with confirmed compatibility
As of June 2004, we have confirmed that this system operates correctly with the following
video editors.
•Sony BVE2000, 9100
•Accom Axial 2010, 2020, 3000
•Ampex ACE200
•Panasonic AG A850
For the most recent information, check the following website.
http://www.yamahaproaudio.com/
Supported Commands
All commands are Write commands that will be used to change the status of the DM1000
from the connected video editor.
Remote Connector Pin Assignment
You need the following dedicated cable to connect the DM1000’s Remote connector to a
video editor.
-Remote connector’s pin assignment
* On the dedicated cable,
2 and 8, and 3 and 7 should be crossed.
No. Command Hexadecimal
1
All Stop A0
2
Transition Duration A7
3
Transition Start A9
4
Monitor Mode AA
5
FROM Machine B4
6
TO Machine B5
7
Monitor Machine B6
8
Swap Machine C0
9
FROM Source A1
10
TO Source A3
11
Monitor Source A5
12
FROM Source (Multi-channel) BC
13
TO Source (Multi-channel) BD
14
Monitor Source (Multi-channel) BE
15
Transition Duration (Multi-channel) BF
Pin # Connector on a video editor Remote connector on the DM1000
1
Ground Ground
2
Receive A Receive A (*)
3
Transmit B Transmit B (*)
4
Ground Ground
5
Spare Spare
6
Ground Ground
7
Receive B Receive B (*)
8
Transmit A Transmit A (*)
9
Ground Ground
12345
6789