Filter
Top Products
376 Appendix D: Options
DM1000 Version 2—Owner’s Manual
Rack Mounting the MB1000 Using Rack Angle Brackets
You can rack mount the MB1000 meter bridge using the rack angle brackets that came with
the meter bridge.
1 Detach the MB1000 from the DM1000. Also, remove the SP1000 side panels
if they are attached.
2 Hold a rack bracket against one side of the meter bridge so that the rack
angle bracket ear projects to the side, and align two holes on the brackets
with the holes on the side of the meter bridge, as shown in the illustration
below.
3 Affix the bracket using the screws included in the meter bridge package.
4 Attach the other bracket to the other side of the MB1000 in the same way.
Rack angle bracketSide of Meter Bridge