Filter
Top Products
22 Chapter 2—Control Surface & Rear Panel
DM1000 Version 2—Owner’s Manual
LAYER Section
A [1-16]/[17-32]/[33-48] buttons
These buttons select an Input Channel Layer. The channel strips control Channels 1–16,
17–32, or 33–48, depending on the button selected here. (See page 33 for more information
on Layers.)
B [REMOTE 1]/[REMOTE 2] buttons
These buttons select the Remote Layer, which can be used to control external devices,
including DAWs. (See page 215 for more information on the Remote Layer.)
C [MASTER] button
This button selects the Master Layer, which can be used to control Bus and Aux Send. (See
page 33 for more information on the Master Layer.)
SCENE MEMORY Section
A Scene memory display
The number of the currently-selected Scene memory is displayed here.
B Edit indicator
If you adjust a mix parameter after a Scene has been recalled or stored, a dot flashes here.
C [STORE] button
This button enables you to store the current mix settings (See page 163 for more informa-
tion on Scene Memories).
D Scene Up [ ] / Down [ ] buttons
These buttons select a Scene to store or recall. Pressing the Scene Up [ ] button increments
the selection; pressing the Scene Down [ ] button decrements the selection. Holding down
either key increments or decrements the selection continuously.
E [RECALL] button
This button recalls the Scene memory selected by the Scene Up [ ] / Down [ ] buttons.
1
3
2
SCENE MEMORY
STORERECALL
21 3 4 5