Yamaha 006IPTO-F0 Music Mixer User Manual


 
Rear Panel 27
DM1000 Version 2—Owner’s Manual
2
Control Surface & Rear Panel
G WORD CLOCK OUT connector
This BNC connector outputs a wordclock signal from the DM1000 to a connected external
device.
H WORD CLOCK IN connector
This BNC connector inputs a wordclock signal from a connected external device to the
DM1000.
I 2TR OUT DIGITAL AES/EBU 1
This XLR-3-31-type connector outputs AES/EBU format digital audio. The connector is
typically used to connect the digital stereo input (AES/EBU format) of a DAT recorder, MD
recorder, or CD recorder.
J 2TR OUT DIGITAL COAXIAL 2
This phono connector outputs consumer format (IEC-60958) digital audio. The connector
is typically used to connect the digital stereo input (consumer format) of a DAT recorder,
MD recorder, or CD recorder.
K 2TR IN DIGITAL AES/EBU 1
This XLR-3-32-type connector accepts AES/EBU format digital audio. The connector is
typically used to connect the digital stereo output (AES/EBU format) of a DAT recorder,
MD recorder, or CD recorder.
L 2TR IN DIGITAL COAXIAL 2
This phono connector accepts consumer format (IEC-60958) digital audio. The connector
is typically used to connect the digital stereo output (consumer format) of a DAT recorder,
MD recorder, or CD recorder.
Power Section
A Grounding screw
Be sure to use this screw to ground the DM1000 to protect yourself against electrical shock.
The supplied power cord features a three-pin plug. If the ground terminal of the AC outlet
is grounded, then the unit will be grounded sufficiently via the power cord. If the AC outlet
does not provide a suitable ground, this screw must be connected to a suitable ground
point. Grounding is also an effective method for eliminating hum, interference, and other
noise.
B POWER ON/OFF switch
This switch turns the power to the DM1000 on or off.
C AC IN connector
This connector enables you to connect the DM1000 to an AC outlet via the supplied power
cord.
Note: To prevent loud clicks and thumps in your speakers, turn on your audio equipment in
the following order (reverse this order when turning off)—sound sources, multitrack and mas-
ter recorders, DM1000, monitoring power amplifiers.
POWER
ON
OFF
AC IN
32
1