Filter
Top Products
Using Libraries 181
DM1000 Version 2—Owner’s Manual
Libraries
15
Bus to Stereo Library
You can store Bus to Stereo settings (levels and panpots of signals routed from Bus Outs 1–8
to the Stereo Bus). The library contains one preset memory and 32 user (readable & writ-
able) memories.
To access the Bus to Stereo library, press the SELECTED CHANNEL [DISPLAY] button
repeatedly until the Routing | Library page appears.
A CURRENT CONFIGURATION section
Bus Out (1–8) pairing information for the current configuration is displayed here.
B LIBRARY CONFIGURATION box
Bus Out pairing information for the configuration stored in the currently-selected
memory is displayed here. When the current configuration and the configuration in the
selected memory do not match, the word “CONFLICT” appears in the LIBRARY CON-
FIGURATION box.
For details on storing and recalling memories, see “General Library Operation” on
page 173.
Gate Library
The Gate library enables you to store and recall Input Channel gate settings. The library
contains four preset memories and 124 user (readable & writable) memories.
Follow the steps below to use the Gate library.
1 Press the DISPLAY ACCESS [DYNAMICS] button, then press the [F2] button.
The Dynamics | Gate Lib page appears.
1
2
1
3
4
2