Filter
Top Products
Setting Aux Out 1–8 from the Display 95
DM1000 Version 2—Owner’s Manual
8
Aux Sends
Delaying Aux Outs
To delay Aux Out 1–8 signals, press the [ /INSERT/DELAY] button repeatedly until the
/INS/DLY | Out Dly page appears.
The parameters on this page (and the procedure for setting them) are the same as for Input
Channels, except that this page does not have the MIX/FB.GAIN parameters (see page 63).
Comp settings
To set the Aux Out 1–8 compressors, press the [DYNAMICS] button, then the [F3] button
to display the Dynamics | Comp Edit page, and select the desired Aux Out 1–8 by using the
corresponding [SEL] buttons or faders.
The parameters on this page (and the procedure for setting them) are the same as for Input
Channels (see page 66).
Tip: You can also display the Out Dly page by pressing the [ /INSERT/DELAY] button once,
then selecting the desired Aux Out (1–8) by pressing the corresponding [SEL] button or moving
the fader.