Filter
Top Products
128 Chapter 11—Surround Functions
DM1000 Version 2—Owner’s Manual
Setting Up and Selecting Surround Pan Modes
To configure the surround environment, select 3-1, 5.1, or 6.1 Surround mode on the
DM1000 and connect a multi-channel monitoring system to the DM1000.
1 Press the DISPLAY ACCESS [PAN/SURROUND] button repeatedly until the
Pan/Surr | Surr Mode page appears.
A SURROUND MODE
This parameter enables you to select a Surround mode by using the following buttons.
The button that is turned on (highlighted) indicates the currently-selected Surround
mode.
• STEREO ........................ The DM1000 uses normal stereo mode (default).
• 3-1 ..................................Selects 3-1 Surround mode.
• 5.1...................................Selects 5.1 Surround mode.
• 6.1...................................Selects 6.1 Surround mode.
B PAN/SURR LINK
When this button is turned on, Input Channel panpots and stereo surround panning are
linked.
C
Press this button to display the Surr Bus page, which enables you to change the Surround
Channel to Bus Out assignment.
2 Move the cursor to the Surround mode button you want to use.
When you move the cursor to one of these buttons, speaker icons appear, indicating a typ-
ical listening position and the Surround Channel to Bus Out configuration.
2
3
1
• 3-1 Surround