Button
Activating this button stores the current dynamics settings into one of the
fifty library memories. The [NAME EDITOR] window pops up, prompting
you to name the memory. After naming it, cursor to the button in the
[NAME EDITOR] window, and press the ENTER button. The MEMORY
numeric readout will flash for two seconds, indicating that you have written
to the library memory. The library comes with all memories named INITIAL*.
Button
Activating this button clears the current library memory and resets it to the
factory settings. When accessing this button, you should be thinking “back-
up.”
Button
Activating this button opens the [NAME EDITOR] window, prompting you to
name the memory. After naming it, cursor to the button in the [NAME
EDITOR] window, and press the ENTER button. The MEMORY numeric
readout will flash for two seconds, indicating that you have written to the
library memory.
Button
Cursor to this button, and press the ENTER button to protect the current
dynamics library memory from being cleared or overwritten.
Library memory selections can be made, when the cursor is within the
[Library Data] area, by rotating the JogDial. Rotating it clockwise moves the
cursor through the library numbers from low to high (1 through 50), while
rotating the JogDial counter-clockwise moves the cursor through the library
from high to low (50 through 1).
Chapter 9
DA7 Users’ Guide
9
-
16
9
Dynamics/
Delay