Filter
Top Products
Writing a Scene Memory
Writing a Scene Memory uses the same procedure as READ. Select a memory
file number, move the cursor to the button, and press the ENTER
button. The [MEMORY] display will flash for five seconds, indicating that the
settings have been written to the selected Scene Memory.
Input of Scene Memory Title
Press the ENTER button, when the cursor is over the button, and the
[NAME EDITOR] window will appear over the [RD/WR] window. Alpha-
numeric characters can be input from the Keypad or the keyboard in the
[NAME EDITOR] window.
Setting of Read Protection Channel
To activate read protection to a selected channel or all channels, cursor down
to the [PROTECT CHANNEL SELECT] area in the window. If the
button is selected and activated, nothing from the Scene Memory can be
recalled into the system.
If you prefer to protect only a select group of channels, scroll through the
channel numbers, and press the ENTER button on your choice.
In the [READ PARAMETER] area there are several parameters that can be
programmed on or off selectively, or collectively.
Chapter 15
DA7 Users’ Guide
15
-
4
15
Scene
Memory