Filter
Top Products
Chapter 13
DA7 Users’ Guide
13
-
7
13
Group
13-4 LINK/STR Window
Use this window to designate the adjacent channel pairs that are to operate
as a fader linked pair or stereo pair. Pairs can be set for inputs, aux returns,
aux sends, and buses.
The channel pairs are established from left to right for the channel strips of
the DA7, beginning with the lower-number, odd-numbered channel. You
cannot establish a pair with channels 6 and 7, for example. Channel 6 can
only be paired with channel 5.
The and buttons toggle in the [LINK/STR] window. When an existing
button in the window is selected with the cursor, pressing the ENTER
button activates the associated channel pair, and the button will be
replaced by an button in the window.
When a channel pair has been activated in the [LINK/STR] window, the
settings of the odd-numbered channel are copied to the even-numbered
channel, and the balance value is set to the center.
LINK/STR Window
You can also create a channel pair by simultaneously pressing the
appropriate channel SELECT LED buttons, when the
[CHANNEL] window [LINK] area is . To cancel,
simultaneously press the buttons a second time.