Filter
Top Products
Chapter 11
DA7 Users’ Guide
11
-
7
11
MIDI
[SCENE LIST TABLE] Area
Rotate the JogDial to select a scene memory number.
[ASSIGN] Indicator
An arrow indicates a status. The scene memory is registered to the
selected table by pressing the ENTER button. At that time, the
arrow symbol is highlighted and shows the selection.
Button
Initialize the table. Cursor to the button, and press the ENTER
button. This function returns all the data in the change table to the state of
default.
Setting of Registration
Press the MIDI button in the SETUP section of the Top Panel to display
the [MIDI>PRG ASGN] window on the LCD.
Cursor to the [PROGRAM CHANGE TABLE] area. Rotate the JogDial to
move the cursor to the destination line.
Press the right ARROW button, to cursor to the [SCENE LIST] area.
Rotate the JogDial to cursor to the source line.
Press the ENTER button. The [ASSIGN] indicator located between the
two tables is shown inversely for a moment. The selected line in the
[PROGRAM CHANGE TABLE] changes, for example, from 51=NO
ASSIGN to 51=0.8:SCENE NAME.
Refer to Appendix G, MIDI Implementation Chart for the control change
table and the control change parameter list.
4
5
Scene List Table
1
2
3