Filter
Top Products
Chapter 9
DA7 Users’ Guide
9
-
7
9
Dynamics/
Delay
[FUNCTION] Area
This area is where you choose either compressor + gate mode, or expander
mode. Activate the button to control the parameters for the
compressor + gate. Activate the button to control the parameters
for the expander.
[STEREO LINK] Area
The stereo link setting defines the relationship between channels in a stereo
pair when making gain adjustments to the channels. Cursor to this area, and
use the JogDial to scroll the stereo link selections in the data field. The
stereo link options are:
●
When is the stereo link selection, gain adjustments made to
either channel in the stereo pair will be independently applied to the
channels. This will cause the stereo imaging to shift in favor of the
channel with the higher level.
●
When is the stereo link selection, gain adjustments made to
the left channel in the stereo pair will automatically be applied to the
right channel. The stereo imaging will remain centered, regardless of the
level.
●
When is the stereo link selection, gain adjustments made to
the right channel in the stereo pair will automatically be applied to the
left channel. The stereo imaging will remain centered, regardless of the
level.
●
This is the default setting for the stereo link function. When is
the stereo link selection, gain adjustments made to either channel in the
stereo pair will automatically be applied to the second channel. The
stereo imaging will remain centered, regardless of the level.
[POSITION] Area
The dynamics circuit can be patched in either before or after the EQ. Select
the button, and press the ENTER button to put the dynamics ahead
of the EQ. Select the button, and press the ENTER button to put the
dynamics after the EQ. Let experimentation be your friend here. Boosting
EQ in front of dynamics can lead to some outrageous dynamic effects.