Filter
Top Products
Button
When this parameter is selected, access to other global information is turned on.
Button
All of the parameters in the [READ PARAMETER] area are selected on or
off. Selected parameters appear as inverse video.
Button
All parameter selections in the [READ PARAMETER] area are deactivated.
[PROTECT CHANNEL SELECT] Area
Here you can identify which, if any, Channel Strips will be protected:
INPUT 1-32, AUX RTN 1-6, AUX SND 1-6, BUS 1-8, or MASTER L/R.
To protect a channel, move the cursor to a selected channel, and press the
ENTER button. The selected channel will appear in inverse video when
protected. Once you protect a channel, it will remain with all its settings
even after you recall a Scene Memory.
Recalling a Scene Memory
When the [10 KEY SCENE RECALL] is on in the [UTILITY>CONFIG]
window, Scene Memories 1-10 can be recalled using the Keypad. Input the
number of the Scene Memory location to be recalled. The DA7 will
automatically recall that configuration, setting channel on or off, fader levels,
pan, balance, EQ, dynamics, fader group, and mute group assignments.
When the [10 KEY SCENE RECALL] is off, and the button is on,
Scene Memory can not be selected using the Keypad. To select a memory for
recall, scroll through the display and find the memory you want. By pressing
the ENTER button, the numeric readout will flash the selected Scene Memory
that you have recalled in the [MEMORY] display. The selected Scene Memory
is recalled.
Dots on the display indicate that the parameter has not been operated since
the current Scene Memory was recalled.
Dots go off at the point at which any parameter of the current memory is
changed, or by selecting another Scene Memory.
Chapter 15
DA7 Users’ Guide
15
-
3
15
Scene
Memory