Filter
Top Products
Button
Set the real-time message input and output port by pressing the ENTER
button. Activate a port to send and receive MIDI clock and other real-time
messages.
Cursor to the line, and press the ENTER button to display either
or
.
Button
This button sets the MMC (MIDI machine control) output destination, either
or
.
Cursor to the [PORT] column, and press the ENTER button to
toggle the selections. Cursor to the [CH] column, and rotate the JogDial to
select a MIDI channel to match the external MIDI device.
Button
Set the transmitting port of the MIDI Remote 1 by pressing the ENTER
button. Rotate the JogDial to select the same MIDI channel that matches the
external MIDI device.
Button
Set the transmitting port of the MIDI Remote 2 by pressing the ENTER
button. Rotate the JogDial to select the same MIDI channel that matches the
external MIDI device.
Button
Switch the settings of the DA7 on or off when receiving a command.
Button
Switch command transmission on or off when operating the DA7.
Button
Switch pass-through of a MIDI input signal to an output on or off.
Chapter 11
DA7 Users’ Guide
11
-
5
11
MIDI