Filter
Top Products
Chapter 16
DA7 Users’ Guide
16
-
5
16
Utility
[SOLO LEVEL] Area
The [SOLO LEVEL] can be controlled by the soft knob in the window.
The current value appears in the field with a range of -
∞
dB - +10dB.
When you position the cursor on the soft knob, rotating the JogDial
will raise or lower the output level.
[MONITOR CHANNEL SELECT] Area
An extension of the [SOLO MONITOR] functions, the [MONITOR
CHANNEL SELECT] area, is divided into several sections for discrete
assignment of SOLO to CHANNELS 1-32, AUX RTN 1-6, AUX SND 1-6,
and BUS 1-8, individually for [SOLO] mode, or collectively in [MIX] mode.
When a SOLO button is selected from the Top Panel, the respective buttons
in the [MONITOR CHANNEL SELECT] area will appear as inverse video.
Button
Selecting the button terminates the assignments for the
[MONITOR CHANNEL SELECT] area buttons.
MONITOR CHANNEL SELECT Area
When you have solo’d multiple channels, you may wish to clear
them all at the same time. You may not be able to see all the
channels you have solo’d at any one time because they may be
on different fader layers, thus causing confusion as to what is or
is not solo’d. In either case, simply press any lighted solo button
for two seconds and all the solos will clear. See page 16-2,
Utility, Solo Monitor (SOLO/MON) Window, for more
information.
You should turn ON and assign the buses as surround sound in
the [SURROUND SOUND] area of the [SOLO/MONITOR]
window.