Filter
Top Products
Chapter 11
DA7 Users’ Guide
11
-
3
11
MIDI
[MIDI SETUP] Area
Here, the direction of messages (serial data) coming from and going to MIDI
IN, MIDI OUT, and TO PC is set. Select one of these four combinations to
set the direction of data:
Status 1: When is set to and is set to , the DA7
cannot communicate with the personal computer. Data can be
transmitted and received between the DA7 and a MIDI device. A
message is input from the MIDI device to the MIDI IN terminal, while
the DA7 outputs a message to the MIDI device from its MIDI OUT
terminal.
Status 2: When is set to and is set to , the
DA7 can receive messages from the MIDI device and transmit messages
to the personal computer. The personal computer and the MIDI device
can communicate with each other via the DA7.
Status 3: When is set to and is set to , the
DA7 can receive messages from the personal computer and transmit
messages to MIDI OUT.
Status 4: When is set to and is set to , the
DA7 can communicate only with the personal computer.
Button
Set the MIDI input port by pressing the ENTER button. Rotate the JogDial
to set . Cursor to on the line, and press the ENTER
button to display either or .
Cursor to on the line, and rotate the JogDial to display one of the
channels, 1 through 16 and omni [OM] for the DA7. The DA7 is controlled
by a message from the selected port, either [MIDI] or [ToPC].
MIDI SETUP Area
1
2
4
3