Filter
Top Products
[PEAK HOLD] Area
This area sets the peak hold or . Cursor to the selection button, and
press the ENTER button. Peak hold dots will appear on the meter. The
current peak hold levels appear in the data fields of the [PK] area. When
,
hold time is 0.3 seconds. When (infinity) is selected, the peak hold
indicator remains until overwritten by a new peak level or is turned .
When the SELECT LED button of any channel is pressed, the [METER]
window for the selected channel appears.
Cursor to the or the button in the [RESPONSE] area, and press the
ENTER button. The selected button will be highlighted. This setting is
common to all of the input and output channel windows, the panel, and the
Display Bridge. The setting from the factory when the DA7 is first turned on
is .
To cancel the peak hold function, cursor to the button, and press the
ENTER button. The button will toggle to
. To reset the infinite hold,
cursor to the button, and press the ENTER
button
.
[BUS/AUX] Meter Window
This window has meters for [BUS], [AUX SEND], [AUX RETURN], and
[MASTER], and permits meter operation modes adjustments for
[RESPONSE], [POSITION], and [PEAK HOLD].
The [RESPONSE], [POSITION], and [PEAK HOLD] operations are the
same as in the [INPUT 1-32] window. However, you can have inputs selected
while the meters are set to .
OFF
ON
ON
OFF
ON
OFF
ON
Chapter 5
DA7 Users’ Guide
5
-
18
5
Channels,
Library, &Meters
BUS/AUX Meter Window