Filter
Top Products
[TIME/PARAMETER/DATA/CH] Area
In order to select an event, you must first place the cursor in this area. You
can then select an event to be edited from here. Rotate the JogDial through
the events and select an entire event or a single event item.
To edit an individual event item from the list, use the left and right arrow
keys to select the item you wish to edit. You can select from [TIME],
[PARAMETER], [DATA], or [CH]. Once you have selected the item you wish
to change, use the JogDial to enter the new data, and press the ENTER
button to change the parameter. The entire Event list will immediately
change to reflect the new data. You may now continue to edit events, or exit
the window.
If the new data change is related to time, you may be momentarily confused
by the new order of the list. You may have to scroll through the list again to
re-orient yourself.
When you have finished editing the entire event list and wish to exit, press
the AUTOMATION button again.
[TIME]
Edit timecode from this area in hours, minutes, seconds, and frames.
Measures, beats and clocks are displayed in the [TIME] column when
MIDI clock is selected. To edit the beat, set both clocks and beats to
“01”. The [BEAT CHG 1-12] will appear in the [PARAMETER] column
at the bottom of the event list (when scrolled to the end) and press the
ENTER button. Select the beat you wish to change in the [DATA]
column.
[PARAMETER]
The event parameters that can be edited appear here.
Chapter 14
DA7 Users’ Guide
14
-
16
14
Automation
TIME/PARAMETER/DATA/CH Area