Filter
Top Products
The SELECT LED button, when on (orange), identifies the channel as the
current channel selected. Only one Fader Strip can be selected at a time
(unless it’s in stereo or link mode).
For more detail, see Chapter 5, Channel, Library, and Meter Windows.
The ON LED button toggles on (red) and off. When on, the channel output is
active.
There are two channel numbers for each strip, indicating the INPUT
connections on the Rear Panel of the DA7.
The AUX/BUS label at the bottom of a Channel Fader Strip indicates its
function when the AUX/BUS Fader Layer control is selected.
See Chapter 6, Fader Layers and Channel Strips for additional information.
AUTOMATION/AUX LED Button
The AUTOMATION/AUX LED button toggles the display of the Channel
Fader Strips LED field indicators. The LED color indicates the current
selection.
See Chapter 14, Automation and Chapter 10, AUX for additional
information.
MASTER DISPLAY Section
Chapter 2
DA7 Users’ Guide
2
-
7
2
DA7 Tour
METER
button
CHANNEL
button
2
3
AUTOMATION/AUX LED Button
MASTER DISPLAY Section