Filter
Top Products
Chapter 4
DA7 Users’ Guide
4
-
3
4
Cursor
Control
Use the cursor controls to navigate to the various character and symbol
buttons in the [NAME EDITOR] window, and press the ENTER button to
update the highlighted character position in the window data entry field.
Rotate the JogDial to select the highlighted character position. Press the
button in the [NAME EDITOR] window to accept the data entry and
close the window. You can use up to ten characters for a name.
JogDial
The JogDial performs several functions, either directly or in conjunction
with other controls on the DA7.
The LCD display will show which mode you are in by a display of
the function in the lower right hand corner. If you are in the MMC
mode, it will show you the MMC command being sent. If it
is in the CURSOR mode, it will display the CURSOR . If it is
in the PARAMETER mode, the display will be blank.
You can use the JogDial to rapidly navigate the cursor to the
various buttons, areas, and fields in a window. Or, you can use it as
a Parameter knob to change values entered in the selected field.
To change the mode from JogDial to Parameter, simply press
CURSOR MODE and it will toggle between these two functions.
When the [SCENE MEMORY>RD/WT] window is initially
displayed, the JogDial is assigned to the register list area of the
window and can be used to scroll the list.
When an element is selected in the [LIBRARY DATA] area of the
[CH LIB], [EQ LIB], or [DYN LIB] windows, you can use the
JogDial to scroll the register list.
When the [list table] element is selected in the
[AUTOMATION>SETUP] window or the [AUTOMATION>EVT
EDIT] window, you can use the JogDial to scroll the items in the
list.
When the [list table] element is selected in the [MIDI>PRG
ASGN], [MIDI>CTRL ASGN], or [MIDI>MIDI RMT] windows, you
can use the JogDial to scroll the items in the list.
JogDial Display
●
●
●
●
●
●