Filter
Top Products
[PAN/BAL] Area
Use this area to set the pan or balance characteristics of the current channel.
A monophonic channel can be panned. The soft knob controls the pan
characteristics for the channel. When a stereo channel is selected, you can
adjust its balance. The pan value appears in the field with values of L16 - C -
R16.
When a channel is assigned to the L/R output selection in either the
PAN/ASSIGN
,
BUS ASSIGN section, or the [ASSIGN] area in the
[CHANNEL] window, the pan controls are always active, regardless of the
or status in the [PAN/BAL] area of the [CHANNEL] window.
When a stereo channel (a channel set to [STeReo] or [ASSIGN] ) is
selected, the [PAN/BAL] area consists of the or button, a [BAL]
label, and one soft knob that controls the balance for the stereo pair.
To activate the [PAN/BAL] controls, cursor to the button, and press the
ENTER button. The button toggles to . Alternatively, pressing the
ON LED button (red) in the PAN/ASSIGN section toggles the pan
off and on to the buses for a selected channel. The PAN does not affect Direct
Out. Pan is always selected to the L/R bus regardless of the position of the
ON LED (red).
The (gang) button appears only when you select a monophonic
channel. To activate gang, cursor to the button, and press the
ENTER button. The button toggles to .
When the button is activated, the adjacent channel soft knob
and a gang type button ( is for normal clockwise direction and
is for reverse direction) are added to the [PAN/BAL] window area.
To change the gang type, cursor to the or button, and press the
ENTER button. The connective turn direction of the pan soft knobs
for the ganged channels is now switched. When is visible, the
JogDial performs a connective turn in the normal direction. When
is visible, the JogDial performs a connective turn in the reverse
direction.
If either soft knob is rotated to the end of its range under the
ganged condition, it can not be rotated further in that direction.
=
=
=
GNG
GNG
GNG
ON
OFF
OFF
OFF
ON
LR
ON
ON
OFF
Chapter 5
DA7 Users’ Guide
5
-
8
5
Channels,
Library, &Meters
[PAN/BAL] Area