Filter
Top Products
13-2 FADER GRP (Fader Group) Window
Use the [FADER GRP] window to select channels to a group so that multiple
faders can be controlled by operating one of the faders in that group. Up to
four groups can be defined.
Window Elements
Group Selection Marker
The group selection marker is a frame which spans the columns in the tables
displayed in the window. The marker is positioned on [GRP 1] at the top of
the [INPUT 1-16] table whenever the [FADER GRP] window is initially
displayed. The marker delineates the current group selection.
Rotate the JogDial to shift the marker from group to group and from table
to table. Rotate clockwise to shift the marker up, and rotate counterclockwise
to shift the marker down. Continue to rotate clockwise when the marker
reaches the bottom of the third table to jump the marker to the top of the
first table in the window. Continue to rotate counterclockwise when the
marker reaches the top of the first table to jump the marker to the bottom of
the third table in the window.
Press the ENTER button to enable or disable the currently selected group.
The group number of an enabled group is highlighted in reverse video.
Chapter 13
DA7 Users’ Guide
13
-
3
13
Group
FADER GROUP Window