Filter
Top Products
Serial Port [RS-422/485]
Use this serial port to connect an IBM compatible computer that has an RS-
422/485 port. Connect to the DA7 with a D-SUB 9-pin connector. Optional
remote control software for your computer can be used to control the DA7,
thus expanding the features and capabilities of the mixer.
Serial Port [TO PC]
Use this serial port to connect with a Macintosh computer. If the computer is
IBM compatible, you may need a conversion cable that changes a Mini-DIN 8
pin (for TO PC) to a D-sub 9 pin(for RS-232C), available at your nearest
dealer, shown in Appendix E, Cables and Connections. Optional remote
control software for your computer can be used to control the DA7, thus
expanding the features and capabilities of the mixer.
MIDI IN
This connector is used to receive signals from peripheral MIDI devices.
MIDI OUT
This connector is used to send signals to peripheral MIDI devices. The DA7
can be used as a MIDI controller. See Chapter 11, MIDI for details.
METER BRIDGE Connector
This is used to connect the optional Meter Bridge to the DA7.
See Chapter 17, Options for more details.
Chapter 2
DA7 Users’ Guide
2
-
30
2
DA7 Tour
For TO PC, use only a Macintosh Printer Cable (cross type) to
connect two DA7s each other, or between the DA7 and the serial
port of a Macintosh computer. Using a straight type of modem
cable may cause malfunctions in serial communications. For more
details see Appendix E, Cables and Connections.