Filter
Top Products
10-3 FADER CONTROL Window
This window displays the aux send status of all the input channels. You can
set pre-fader or post-fader selections and the aux send on or off status of
each channel from this window. This window is displayed when the [FADER
CONTROL] LED button is activated (red). The [FADER CONTROL>AUX]
window displayed will change when you press any of the AUX 1-6 LED
buttons, and the faders will follow.
[FADER CONTROL] Window, Elements
and Buttons
The post-fader and pre-fader selection buttons toggle for the selected aux
send. Cursor to the button in the window, and press the ENTER button to
toggle the selections. They can also be seen (and activated) from the
[CHANNEL] window.
and Buttons
When the channel is selected, cursor to the current button in the window, and
press the ENTER button. You can also press the LEVEL ON/OFF knob to
toggle the aux send status.
Chapter 10
DA7 Users’ Guide
10
-
5
10
AUX
FADER CONTROL Window