Filter
Top Products
Chapter 16
DA7 Users’ Guide
16
-
3
16
Utility
[MON A] Area
Engaging the [MON A] button lowers the volume of the MONITOR A
system by 20dB, regardless of Talk Back operations. To toggle the [MON A]
DIM button while the button is not displayed on the LCD, from the
TopPanel press and hold the MMC/CURSOR button, at the same time press
the SOLO/MONITOR button.
If the [MON A] button is off, the monitor volume will be lowered by
20dB whenever the TALKBACK button on the Top Panel is on. The
monitor volume will be restored when the TALKBACK button is turned off.
[SURROUND MONITOR] Area
The surround monitor feature is toggled or in this area of the
window. The button toggles with a button, which determines the
assignment for the surround bus monitor outputs. Cursor to the button,
and press the ENTER button to toggle to the button. The surround bus
assignments are reflected in the table below, as determined by the current
selection.
The outgoing [MASTER LEVEL] of the surround sound feature is also set in
this area of the window. The soft knob controls the level for the surround
sound monitoring system. The knob has a range of -
∞
to +10dB. Cursor to
the [MASTER LEVEL] soft knob, and rotate the JogDial to raise or lower
the surround monitor output level. To control the [MASTER LEVEL] knob
while that soft knob is not displayed on the LCD, from the TopPanel, rotate
the Level ON/OFF knob in the AUX section, when the individual channel
surround screen is displayed.
See Chapter 8, Pan/Assign, Surround, Bus Assign for further information.
MON
MON
ON
OFF
SURROUND MONITOR Area
MON
Surround
bus 1 (L)
Mon A (L)
Mon A (L)
Surround
bus 2 (R)
Mon A (R)
Mon A (R)
Surround
bus 3 (C)
Aux send 3
Mon B (L)
Surround
bus 4 (SW)
Aux send 4
Mon B (R)
Surround
bus 5 (SL)
Aux send 5
Master L
Surround
bus 6 (SR)
Aux send 6
Master R
MON AArea