Filter
Top Products
151
CHAPTER 9 CC-Link IE FIELD NETWORK DIAGNOSTICS
9
9.8 Remote Operation
9.8 Remote Operation
Remote operations (RUN, STOP, and RESET operations) can be executed from GX Developer to the station selected
in the "CC IE Field Diagnostics" window.
The displayed window varies depending on the station selected. For the operations with a module other than a
master/local module selected, refer to the manual for the module used.
*1 To perform remote RESET, preset "Allow" in "Remote reset" in the "PLC system" of the PLC Parameter window.
1. Connect GX Developer to the safety CPU module.
2. Start the CC-Link IE Field Network diagnostics from
the menu.
[Diagnostics] [CC IE Field diagnostics]
3. Select the module where the remote operations are
performed in the "CC IE Field Diagnostics" window.
4. Click the button in the "CC IE
Field Diagnostics" window.
Or right-click a module icon in "Network Status",
and click [Remote Operation].
The "Remote operation" window will open.
5. Select a remote operation for the safety CPU
module under "Operation" and "Operation during
RUN".
6. Click the button to perform the remote
operation.
Item Description
RUN
Select a remote operation for the safety CPU
module.
STOP
Reset
*
1
Device memory
Select whether to clear device memory data in
the safety CPU module when remote RUN is
performed.
Signal flow
Select whether to hold signal flow when remote
RUN is performed.