Filter
Top Products
213
CHAPTER 11 PROGRAMMING
11
11.2 Communication Example of when Safety Stations and a Standard Station are Used
11.2.2 Master station (standard station) settings
11.2.2 Master station (standard station) settings
Connect GX Works2 to the master station (standard station) and set parameters.
1. Create a project using GX Works2.
Select "QCPU (Q mode)" in "PLC Series" and "Q10UDH" in "PLC Type".
[Project] [New]
2. Display the network parameter window and set parameters as follows:
Project window [Parameter] [Network Parameter] [Ethernet/CC IE/MELSECNET]
Master station (standard station)
(Station No. 0)
Local station (safety station)
(Station No. 1)
Local station (safety station)
(Station No. 2)
Setting