Filter
Top Products
290
SW0052
Data link start status
(entire system)
Stores the results when cyclic transmission is started by System link start
(SB0002).
0: Normal
1 or higher: Error definition in own station
( Page 246, Section 12.5)
When System link start (SB0002) is turned off, the stored error definition
is cleared.
(Condition)
• This is enabled when Baton pass status (own station) (SB0047) is off.
×
SW0053
Data link stop status
(entire system)
Stores the results when cyclic transmission is stopped by System link
stop (SB0003).
0: Normal
1 or higher: Error definition in own station
( Page 246, Section 12.5)
When System link stop (SB0003) is turned off, the stored error definition
is cleared.
(Condition)
• This is enabled when Baton pass status (own station) (SB0047) is off.
×
SW0054
Temporary error invalid
station setting result
Stores the results when executing the temporary error invalid station
setting.
0: Normal
1 or higher: Abnormal ( Page 246, Section 12.5)
When Temporary error invalid request (SB0010) is turned off, the stored
error definition is cleared.
×
SW0055
Temporary error invalid
station setting cancel
result
Stores the results when canceling the temporary error invalid station
setting.
0: Normal
1 or higher: Abnormal ( Page 246, Section 12.5)
When Temporary error invalid setting cancel request (SB0011) is turned
off, the stored error definition is cleared.
×
SW0056
Result of reserved
station function disable
Stores the result when disabling reserved station function.
0: Normal
1 or higher: Abnormal ( Page 246, Section 12.5)
When Reserved station function disable request (SB0012) is turned off,
the stored error definition is cleared.
×
SW0057
Result of reserved
station function enable
Stores the result when reserved station function disable is undone
0: Normal
1 or higher: Abnormal ( Page 246, Section 12.5)
When Reserved station specification enable request (SB0013) is turned
off, the stored error definition is cleared.
×
SW0058
Number of total slave
stations (setting)
Stores the number of total slave stations that are set by the parameters.
Range: 1 to 120
Number Name Description
Availability
Master
station
(safety
station)
Local
station