Filter
Top Products
222
(Cyclic transmission restart)
8. Specify the station to restart cyclic transmission in the following link special registers (SW).
• Specifying a target station
Link stop/start direction (SW0000)
• Specifying a station number
Link stop/start direction (SW0001 to SW0008)
9. Turn on System link start (SB0002).
10. When the master/local module accepts the request, System link start request accept status
(SB0054) turns on.
11. When cyclic transmission restart is completed, System link start completion status (SB0055) turns
on.
12. If cyclic transmission is restarted with error, an error code will be stored in Data link start status
(entire system) (SW0052).
13. Turn off System link start (SB0002).
Number Description Number Description
SB0002 System link start SW0000 Link stop/start direction
SB0003 System link stop
SW0001 to
SW0008
Link stop/start direction
SB0054 System link start request accept status SW004A Data link stop request station
SB0055 System link start completion status SW0052 Data link start status (entire system)
SB0056 System link stop request accept status SW0053 Data link stop status (entire system)
SB0057 System link stop completion status