Filter
Top Products
30
CHAPTER 2 PAR T NA ME S
This chapter describes the names of each part of the master/local modules.
No. Name Application
1)
RUN LED Indicates the operating status.
ON Operates normally.
OFF A hardware failure or a watchdog timer error has occurred.
MST LED Indicates the station type.
ON Operates as a master station (safety station).
OFF Operates as a local station.
MODE LED Indicates the mode.
ON In online mode.
Flashing In test mode (The module is performing a hardware test, self-loopback test, or loop test.)
OFF In offline mode. (Data link not performed)
D LINK LED Indicates the status of the data link.
ON Data link in operation (cyclic transmission in progress)
Flashing Data link in operation (cyclic transmission stopped)
OFF Data link not performed (disconnected)
SD LED Displays the sending status of data.
ON Sending data.
OFF Data not sent.
RD LED Displays the reception status of data.
ON Receiving data.
OFF Data not received.
1)
2)
3)