Filter
Top Products
282
SB00E0
Temporary error invalid
station status
Stores if there are any temporary error invalid stations.
OFF: No temporary error invalid stations
ON: Temporary error invalid station found
If a temporary error invalid station is found, the status of each station can
be checked by Temporary error invalid station setting (SW00E0 to
SW00E7).
Depending on the timing of the link refresh, the update of Temporary
error invalid station setting (SW00E0 to SW00E7) may be offset by one
sequence scan.
(Condition)
• This is enabled when Baton pass status (own station) (SB0047) is off.
SB00F0
CPU RUN status (each
station)
Stores the RUN status of each station's CPU module.
OFF: All stations are in RUN or STEP-RUN status
ON: Station in STOP or PAUSE status found
If a station in STOP or PAUSE status is found, the status of each station
can be checked by the CPU RUN status (each station) (SW00F0 to
SW00F7).
Depending on the timing of the link refresh, the update of CPU RUN
status (each station) (SW00F0 to SW00F7) may be offset by one
sequence scan.
(Condition)
• This is enabled when Baton pass status (own station) (SB0047) is off.
SB00F1
CPU RUN status
(master station)
Stores the RUN status of the master station's CPU module.
OFF: RUN or STEP-RUN status
ON: STOP or PAUSE status
(Condition)
• This is enabled when Baton pass status (own station) (SB0047) is off.
SB0100
CPU operation status
(each station) (1)
Stores the stop error status for each station.
OFF: All stations normal
ON: Station with stop error found
If a station with a stop error is found, the status of each station can be
checked by Operation status (each station) (1) (SW0100 to SW0107).
Depending on the timing of the link refresh, the update of Operation
status (each station) (1) (SW0100 to SW0107) may be offset by one
sequence scan.
(Condition)
• This is enabled when Baton pass status (own station) (SB0047) is off.
SB0101
CPU operation status
(master station) (1)
Stores the stop error status of the master station's CPU module.
OFF: Normal
ON: Stop error occurred
(Condition)
• This is enabled when Baton pass status (own station) (SB0047) is off.
Number Name Description
Availability
Master
station
(safety
station)
Local
station