Filter
Top Products
209
CHAPTER 11 PROGRAMMING
11
11.1 Precautions for Programming
CHAPTER 11 PROGRAMMING
This chapter describes programming and startup examples of when safety and standard communications are made
among safety and standard stations on CC-Link IE Field Network.
For programming and startup examples not described in this chapter, refer to the following
11. 1 Precautions for Programming
This section describes precautions to create CC-Link IE Field Network programs.
(1) Safety communication program
Refer to the following.
Safety Application Guide
(2) Cyclic transmission program
For a cyclic transmission program, interlock with the following link special relay (SB) and link special register
(SW). ( Page 273, Appendix 3, Page 286, Appendix 4)
• Data link status (own station) (SB0049)
• Data link status (each station) (SW00B0 to SW00B7)
Interlock example
Item Reference
Safety communication between the master station (safety
station) and a local station (safety station)
Safety Application Guide
Standard communication between local stations (standard
stations)
User’s manual for the CC-Link IE Field Network master/local module used
Ex.
Communication program with station No. 1
Communication program with station No. 2
Checking the data link status of
station No. 1
Checking the data link status of
station No. 2