Filter
Top Products
90
7.6 Safety Communication Setting
Set safety communication parameters for stations that perform safety communication.
This setting can be configured when "CC IE Field (Master station [Safety])" and "CC IE Field (Local station [Safety])"
are set in network setting.
(1) Setting procedure
1. Open the setting window in GX Developer.
Project data list [Parameter] [Network param] [Ethernet/CC IE/MELSECNET]
button
2. Set parameters in the window.
3. Click the button.
Item Description Setting range
Assignment Method
Select how to assign safety CPU module devices.
• Points/Start: Set devices by the number of device points and the
start number.
• Start/End: Set devices by the start and last device numbers.
• Points/Start
• Start/End
(Default: Start/End)
Total Number of Stations
When “CC IE Field (Master station [Safety])” is selected in network
setting, the number of slave stations set in “Total stations” is
displayed.
When “CC IE Field (Local station [Safety])” is selected in network
setting, the number of slave stations is not displayed.
Host Station No.
When “CC IE Field (Master station [Safety])” is selected in network
setting, “0” is displayed.
When “CC IE Field (Local station [Safety])” is selected in network
setting, own station number set to “Station No.” in network setting is
displayed.