Filter
Top Products
181
CHAPTER 10 DEDICATED INSTRUCTIONS
10
10.6 JP/GP.WRITE (Writing Data to the Programmable Controller on Another Station)
(2) Function
(a) WRITE instruction overview
The instruction writes data by the specified number of words (control data ((S1) + 9)) from the own station start
device (S2) into the target station word devices (after (D1)).
Specify the target stations in control data ((S1)+4 and (S1)+5).
When the writing to devices of the target station is completed, the completion device (D2) turns on.
(b) Target stations which can be specified
For details on target stations which can be specified, refer to the following.
Page 152, Section 10.1 (1)
Channel 1
Channel 2
WRITE
Safety CPU module CPU module Network moduleMaster/local module
(S2) (D1)
[Own station] [Target station]