Filter
Top Products
Teledyne API - Model T200H/T200M Operation Manual Operating Instructions
91
To define the REPORT PERIOD, follow the instruction shown in Section 4.7.2.2 then
press:
Edit Data Channel Menu
SETUP X.X 0) CONC: ATIMER, 8, 8500
PREV NEXT INS DEL EDIT PRNT EXIT
Exits to the main
Data Acquisition
menu.
SETUP X.X NAME: CONC
<SET SET> EDIT PRINT EXIT
Press SET> until you reach REPORT PERIOD (OR SAMPLE PERIOD) …
SETUP X.X REPORT PERIODD:DAYS:
0
0 0 0 ENTR EXIT
ENT
R
accepts the new string and
returns to the previous menu.
EXIT ignores the new string and
returns to the previous menu.
Press buttons to set hours
between reports in the format :
HH:MM (max: 23:59). This is a
24 hour clock . PM hours are 13
thru 23, midnight is 00:00.
Example 2:15 PM = 14:15
Set the number of days
between reports (0-366).
IIf at any time an illegal entry is selected (e.g., days > 366)
the ENTR button will disappear from the display.
SETUP X.X REPORT PERIODD:TIME:01:01
0 1 0 0 ENTR EXIT
Use the PREV and NEXT
buttons to scroll to the
data channel to be edited.
SETUP X.X REPORT PERIOD:000:01:00
<SET SET> EDIT PRINT EXIT
From the DATA ACQUISITION menu
(see Section 6.7.2.2)
SETUP X.X ENTER DAS PASS: 818
9 2 9 ENTR EXIT
Changing the SAMPLE
PERIOD or REPORT
PERIOD Requires a
special password
07270B DCN6512