Filter
Top Products
129
Song Play
P0
P1 P2 P3 P7 P8 P9
▼ 3–1: Page Menu Command
3–1A: Load Jukebox List
This command loads the jukebox list that you wish to use.
1 In the directory window, select a jukebox list file (file-
name extension .JKB), and then select “Load Jukebox
List”.
The following dialog box will appear.
2 To load the jukebox list, press the OK button. To cancel,
press the Cancel button.
3–1B: Save Jukebox List
This command saves the jukebox list you created as a file.
1 Create a jukebox list, and then select “Save Jukebox
List” to open the following dialog box.
2 Press the text edit button to move to the text edit dialog
box, and input a filename.
3 To save the jukebox list, press the OK button. To cancel,
press the Cancel button.
When you press the OK button, the jukebox list file will
be saved on the media that is selected in drive select.
Here you can make arpeggiator settings for use in Song Play
mode.
You can assign the arpeggiator to the “Play (Track Select)”
track, and play arpeggios with the tempo synchronized to
SMF playback.
You can assign arpeggiators A and B to two different tracks,
and switch “Play (Track Select)” to switch between arpeg-
giators as you perform. Or you can switch arpeggio patterns
or parameters and operate the [GATE] and [VELOCITY]
knobs while you play.
The arpeggiator can be synchronized to the start of SMF
playback.
• Turn on the arpeggiator and press the SEQUENCER
[START/STOP] key, and the arpeggiator will
synchronize with the playback timing of the SMF.
• If you press the SEQUENCER [START/STOP] key, and
both the SMF playback and the arpeggiator will stop. If
you wish to stop only the arpeggiator, turn off the
ARPEGGIATOR [ON/OFF] key.
7–1: Setup 1–8 (Setup T01–08)
7–2: Setup 9–16 (Setup T09–16)
7–1(2)a: Arpeggiator Assign, Arpeggiator Run
Arpeggiator Assign [Off, A, B]
When the ARPEGGIATOR [ON/OFF] key is on, the arpeg-
giator(s) will function according to the “Arpeggiator Run A,
B” settings and the settings of each track.
Off: The arpeggiator will not operate.
A: Arpeggio A will operate. In the Arpeggiator A page you
can select the arpeggio pattern and set the parameters.
B: Arpeggio B will operate. In the Arpeggiator B page you
can select the arpeggio pattern and set the parameters.
Select either arpeggiator A or B for the play track that you
will be playing manually along with the SMF playback. If
you select an arpeggiator for two or more tracks, the arpeg-
giator will sound all the tracks to which it is assigned.
As another possibility, you can assign arpeggiator A and B
to two tracks, select one track as the play track to be con-
trolled from the keyboard, and control the other track from
an external MIDI device connected to MIDI IN.
The arpeggiator will not be applied to notes played
back from an SMF.
3–1A
3–1B
Song Play P7: Arpeggiator
0–1a
7–1
7–1a