Filter
Top Products
Effect
193
When “LFO Waveform” is set to Random, the “LFO Step Freq”
parameter uses a random LFO cycle.
b: LFO Phase [degree]
Offsetting the left and right phases alters how modulation is
applied to the left and right channels, creating a swelling affect.
e: BPM, f: Step Base Note, f: Times
The width of an LFO step, or a cycle of random LFO, is obtained
by multiplying the length of a note (…) (selected for “Step Base
Note”, in relation to the tempo specified in “BPM,” or the MIDI
Clock tempo if “BPM” is set to MIDI) by the number specified in
the “Times” parameter.
j: Wet/Dry
The effect sound’s phase will be reversed when you set this
parameter in the range of values from –Wet to –1:99.
011: St. Exciter/Enhncr
(Stereo Exciter/Enhancer)
This effect is a combination of the Exciter, which adds a punch
to the sound and the Enhancer, which adds spread and pres-
ence.
a: Exciter Blend
This parameter sets the depth (intensity) of the Exciter effect. Pos-
itive values give a frequency pattern (to be emphasized) different
from negative values.
b: Emphatic Point
This parameter sets the frequency to be emphasized. Higher val-
ues will emphasize lower frequencies.
c: Enhancer Dly L [msec], d: Enhancer Dly R [msec]
These parameters set the delay time for the Enhancer left and
right channel. Specifying a slightly different delay time for the left
and right channel will add a stereo image, depth, and width to the
sound.
012: St. Sub Oscillator
(Stereo Sub Oscillator)
This effect adds very low frequencies to the input signal. It is
very useful when simulating a roaring drum sound or
emphasizing powerful low range. This effect is different from
the equalizer in that you can add very low range harmonics.
You can also adjust the oscillator frequency to match a partic-
ular note number, for use as an octaver.
a
Exciter Blend
Sets the intensity (depth) of the Exciter effect
–100...+100
☞,
Src Off...Tempo
Selects the modulation source of the Exciter intensity
Amt –100...+100
Sets the modulation amount of the Exciter intensity
b
Emphatic Point
Sets the frequency to be emphasized
0...70
☞,
Src Off...Tempo
Selects the modulation source of the frequency to be emphasized
Amt –70...+70
Sets the amount of modulation of the frequency to be emphasized
c
Enhancer Dly L (Enhancer Delay L) [msec]
Sets the delay time for the Enhancer left channel
0.0...50.0msec
☞
d
Enhancer Dly R (Enhancer Delay R) [msec] 0.0...50.0msec
Sets the delay time for the Enhancer right channel
☞
Random Filter LFO
LFO Step Freq
LFO Frequency
LFO Step Freq
Step-Tri
Random
LFO Phase
0 +90
+180 [degree]
0 [degree]
–90
–180
Left
Right
Wet / Dry
Wet / Dry
Stereo In - Stereo Out
EQ Trim
LEQ HEQ
EQ Trim
Delay
Delay
Depth
D
-mod
Exciter
Exciter
Enhancer
e
Enhancer Depth 0...100
Sets the determines to what degree the Enhancer effect is applied
Src Off...Tempo
Selects the modulation source of the Enhancer width
Amt –100...+100
Sets the modulation amount of the Enhancer width
f
EQ Trim
Sets the 2-band EQ input level
0...100
g
Pre LEQ Gain [dB]
Sets the gain of Low EQ
–15.0...+15.0dB
Pre HEQ Gain [dB]
Sets the gain of High EQ
–15.0...+15.0dB
h
Wet/Dry Dry, 1:99...99:1, Wet
Sets the balance between the effect and dry sounds
Src Off...Tempo
Selects the modulation source of the effect balance
Amt
Sets the modulation amount of the effect balance
–100...+100
a
OSC Mode Note (Key Follow), Fixed
Determines whether the oscillator frequency follows the note number
or whether it is fixed
☞
b
Note Interval –48...0
Sets the pitch difference from the note number when OSC
Mode=Note (Key Follow)
☞
Note Fine
Fine adjustment of the oscillator frequency
–100...+100
☞
Wet / Dry
Note No.
OSC Mode
Fixed
Note (Key Follow)
Sine Oscillator
Fixed Frequency
Pitch
Note Interval, Fine
Stereo In - Stereo Out
Left
Right
Wet / Dry
Envelope Sens
Envelope Shape
Envelope Shape
D
-mod
Pre LPF
Envelope Sens
Pre LPF